วิธีการ ใช้ a มัลติมิเตอร์ ถึง ตัดสิน จุดพัก ของ ภายใน แบ่ง ของ ลวด
Due to the production process or external force % 2c the wires บางครั้ง break internally When the wire breaks internally% 2c how to quick judge the break point with a multimeter% 3f Two methods can be used% 3a measuring resistance or measuring voltage
% 0aIn นี้ way % 2c ทดสอบ นําไปสู่ ของ มัลติมิเตอร์ อาจ ไม่ ยาว เพียงพอ และ สามารถ เป็น ขยาย กับ อื่น ๆ สาย คุณ สามารถ ยัง เพิ่ม a แรงดันไฟฟ้า ของ 220 โวลต์ ถึง A ขั้ว% 2c และ วัด แรงดันไฟฟ้า ถึง พื้นดิน AC แรงดันไฟฟ้า ช่วง ของ มัลติมิเตอร์ ที่ O จุด ถ้า แรงดันไฟฟ้า เป็น ปกติ % 2c มัน หมายถึง ที่ ความผิด เป็น ใน O% 7eB ส่วน เฉพาะ การวัด วิธีการ คือ เดียวกัน เป็น ความต้านทาน การวัด วิธีการ นี้ วิธีการ ไม่ ไม่ ต้องการ ถึง ขยาย ทดสอบ นําไปสู่ ของ มัลติมิเตอร์% 2c แต่ สด วัด ต้อง จ่าย ให้ความสนใจ ถึง ความปลอดภัย
% 0aFor stranded wires% 2c บิด หลาย สายไฟ ร่วมกัน ที่ หนึ่ง ปลาย แรก
A, B, and C are three wires wrapped in the same insulator, and one of them is broken. Let's connect a section of the wire first. Then use the ohm range of the multimeter to measure the three points A, B, and C respectively. If A and B are connected, A and C are not connected, and B and C are not connected, then the broken บรรทัด ต้อง เป็น บน C ลวด เดียวกัน วิธีการ สามารถ ยัง เป็น ใช้ เพื่อ กําหนด ซึ่ง ลวด ความผิด จุด เป็น บน
% 0aOf course% 2c แรงดันไฟฟ้า method can also be used to measure Connect the connected end to 220 volts% 2c และ จากนั้น ใช้ a multimeter to วัด ground voltage ที่ จุด A % 2c B% 2c และ C ถ้า มี ไม่มี หรือ ผิดปกติ พื้นดิน แรงดันไฟฟ้า ที่ any point 2c it จะ ระบุ ซึ่ง ลวด ความผิด เป็น บน กําหนด ซึ่ง ลวด ความผิด จุด คือ on % 2c และ จากนั้น ใช้ % 22half section% 22 กฎ กล่าวถึง ข้างต้น ถึง ค่อยๆ ตรวจสอบ
The half-section method needs to destroy the insulation of the wire to check the fault point of the wire. A little work experience is for reference only. Now there is a special cable breakpoint detection instrument, but it may be more expensive, I have not used it.
